Clear Window Decals

Installation & Care

Installation

1. Begin by thoroughly cleaning the window or glass surface you intend to use for your decal. After cleaning, use a window squeegee to remove excess water or allow appropriate time for the window to air dry.
2. Create a decal application solution by combining 3 drops of dish soap or detergent (not hand soap) per 1 gallon of water and place into a spray bottle.
3. Lay your transparent window decal on a flat, smooth surface and begin to remove the black liner. The backing is a frosted, semi-transparent material that can be difficult to remove due to its thin properties. If you are having difficulty, try applying a small piece of tape to the corner of the backing and use that to help you peel it away from the decal.
4. As you are removing the backing, generously apply the application solution to the back of the decal. Next, spray a generous amount of application solution to the desired surface, making sure both the adhesive side of the decal and the glass surface are now sufficiently wet. Do not submerge the decal into water in an attempt to soak the adhesive side.
5. You can now apply your clear window decal to the desired window or glass surface. The application solution will allow the decal to slip and move once it is on the window. Use this to your advantage by sliding the decal into its final position.
6. Once the decal is in its final position, place the removed backing over the face of your decal and use the application squeegee to remove air bubbles/application solution from under the decal. When doing so, start in the center of the decal and press firmly to the right or left edge. Continue this process until you have run the squeegee over the entire surface of the decal.
7. Use paper towels to clean the glass surface and to remove excess water from the edges of the decal. It may take several days for the adhesive to fully dry and bind to the glass surface.

Care

Although we recommend using soapy water to help install your decal, don’t allow it to become exposed to water or excessive moisture for an extended period of time before installing. You may wash the window that has the decal applied, but do not power wash your decal after it is installed. When cleaning the decal we recommend using a damp, non-abrasive cloth. This decal may be removed and re-positioned several times. Remove by peeling the decal away from the window and reapplying in the same method as described above.